For connecting to either eduroam or EWUSecure, you will need to make certain settings changes on your Chromebook. The settings you will need to change (shown later in this article) will be the same between the two networks, however, the login information you will use will be different. 

eduroam is a federated network access service developed for universities and colleges around the world to share internet access. When you travel to a university that is a member of eduroam, you can join the 'eduroam' wi-fi network and use encrypted internet access for free. To learn more about eduroam, check out our FAQ.

Follow these directions no matter where you are connecting to eduroam from, whether it's the EWU campus or another eduroam-participating institution.

Open settings for your ChromeOS device by clicking on the notification area in the lower right of your screen. Then click the WiFi icon.

You see a list of available networks, select eduroam or EWUsecure.

Use the following settings for eduroam:

 

SSID: eduroam (do not change it)

Security: EAP

EAP method: PEAP

EAP Phase 2 authentication: MSCHAPV2

CA certificate: Do Not Check

Identity: your_username@ewu.edu

Password: your EWU SSO password
Anonymous Identity: leave blank
Domain (If asked): eastern.ewu.edu

Use the following settings for EWUsecure:

 

SSID: EWUsecure (do not change it)

Security: EAP

EAP method: PEAP

EAP Phase 2 authentication: MSCHAPV2

CA certificate: Do Not Check

Identity: your_username

Password: your EWU SSO password
Anonymous Identity: leave blank
Domain (If asked): eastern.ewu.edu

Click Connect or Save when you are finished. These settings apply to all Android devices. Your screen should look similar to one below.

Some versions of ChromeOS may require you to specify a CA certificate. If so, select "Use System Certificates"  and enter "ewu.edu" for the domain.

Your device should now be connected to the network!